||API 6D / ASME B16.34
|Face to face Dimension
||API 6D / ISO 5208
||ASME B16.5 UP TO 24”
ASME B16.47 ABOVE 24”
||2” – 48” (DN50 – DN1200)
||150 – 1500
||WCB / LCB / LCC / CF8M / CF8 /
CF3M / 4A / 6A / Inconel
||F6a / F316 / F304 / F316L / F51 /
F55 / Inconel / 17.4 PH
||Soft / Metallic
||Flanged / Butt-weld End
Camtech Through Conduit Gate valves offer increased value by incorporating advanced design features. These valves are designs and manufactured with a full bore port, rising stem, OS & Y type with floating seats. These valves are robust in construction and easy In-Line maintainability. The full port bi-directional flow capability minimizes pressure drop and turbulence. The valve seat faces are outside the flow stream and therefore the seats are protected from the erosive action of the fluid flow. These valves are piggable valves and Pigs and scrapers can be run through the valve without causing damage to the valve and seats. Through Conduit valves are primarily used in chemical, petrochemical and oil & gas transmission pipelines, onshore terminals, offshore platforms, Suitable for all types of fluids (including abrasive fluids). Few silent features are indicated as below,
Valves are with Double Block and bleed feature.
Seats are self-relieving. The cavity pressure is relieved to the main stream depending upon the differential pressure.
These valves are fire safe as per API 6FA.
Emergency Seat and Stem sealant injectors are provided.
Stem seal offers tight seal with little to no maintenance over long periods of time.
Non Rotating stem design.
Hardfaced seating faces resist erosion.
Soft seat valves are Bubble tight shut off over extended period of service.
Low emission packing set available for special service.
Drain and Vent are provided as standard features.