||API 6D / ASME B16.34
|Face to face Dimension
||API 6D / ISO 5208
||ASME B16.5 UP TO 24”
||2” – 12” (DN50 – DN300)
||150 – 1500
||Full Bore and Reduced Bore
||A105 / LF2 / LF3 / CF8M / CF8 / CF3M
||F6a / F316 / F304 / F316L / F51
||Soft / Metallic
||Flanged / Butt-weld End
Camtech pig valves are robust in construction and are developed from our existing range of Trunnion mounted ball valves, and having the function of launching or receiving pig, as well as all the features and function of standard pipe line Trunnion mounted ball valves.
Pig valve, normally consists of Pig Launching & Pig Receiving feature, is a device to clean the internal pipe periodically, and it is widely used in Oil & Gas pipeline industry. These valves offer durability and reliable service for oil and gas applications to improve the piping transportation efficiency. It can easily and safely use most of popular pig styles, either One-Piece Molded Pigs or Spherical Pigs that are intended for use in pig ball valves.
Available as a launcher and receiver.
Cost saving over conventional pigging systems.
Lesser joints and system components.
Complete range of fluid compatibility.
Few silent features are indicated as below,
Trunnion Mounted Ball for reduced torque.
Positive Shut Off with optional By-Pass valve
Double Block and Bleed feature.
Drain and Vent plugs
Emergency Sealant Injectors for seat and stem.
Pad lock arrangements.
Longer bearings for smooth robust operation.
Self-relieving cavity pressure seat.
Accepts long Bullet and Spherical pigs.
Designed in accordance with NACE requirements.
Pig Entry cap with vent and relief groove.
ISO 5211 mounting base.